14.6V LiFePO4 RV Power Converter DC Converter Charger for Lithium Iron Phosphate Battery Cars Trucks Rvs 14.6V 20A Max Anderson Connector 100

Basic Info.

Warranty	12 Months
MOQ	50
Certification	UL,ETL,FCC,GS,CE,CB,PSE,Kc,CCC,RoHS,Reach,SAA
Lead Time	7-30 Days
Output Voltage	14.6V
Output Current	20A
Input Voltage	100-240V 50/60Hz
Output Power	290W
Material	Aluminum Casting
Application	LiFePO4 Battery Pack 12.8V
Transport Package	Export Package
Specification	14.6V Converter Charger
Trademark	OEM
Origin	China
HS Code	8504401400

Packaging & Delivery

Package Size 23.00cm * 10.00cm * 6.50cm Package Gross Weight 2.200kg

Product Description

AJ 14.6V LiFePO4 Battery Charger

290W DC-DC

Input:100V-240V~50/60Hz 5A 350VA

Output:14.6V 20A

LED:GREEN≤2A

1,Scope

This specification is applicable to battery charger which are produced by AJ Power Co., Ltd.
This specification subject to application safety standard :UL 1012 EN60335, conducted of EMI CISPR 22 class of insulation B.
2,Product Model:AC 100V~240V / DC 14.6V 20A
3,Mechanical Characteristics :
3.1 Strain relief test:Each terminal of the product shall be capable of withstanding an axial pull of 2Kgs applied gradually and maintained for 60 seconds, without loosening,breaking or other damage.
3.2 Drop test: products shall by dropped form a height of 90cm,onto a dry wood surface ,its thickness is 1cm,after shall no abnormal condition happen,and insulation test 10MΩ Min..
3.3 Cord bending test:the cord shall withstand a weight of 200g,it swings from left to right at an angle of 120 degree(total) 300 times,cord be conductible.
4,General appearance:
The general appearance of the product shall by acceptable without deformation,cracks or corrosion.
5,performance parameter:
5.1 Input voltage:

Item	MIN.	Normal	MAX.
Rating	100V AC 50/60Hz	120V AC 50/60Hz	240V AC 50/60Hz

5.2 Output voltage:

Charging characteristics	No.	Rating
	1	Charging voltage MAX.:(14.6±0.2)V DC
	2	Charging hold voltage :(14.6±0.2)V DC
	3	Charging voltage MIN.:8.0V DC
	4	Charging current:(10±1)A
	5	Loading:3.65V×4S LiFePO4 battery
	6	The green LED lights up ,charge current less than 1A.

5.3 Input current:

Item	100V AC 50/60Hz	120V AC 50/60Hz	240V AC 50/60Hz
No load	/	50mA Max.	/
Loading	/	2000mA Max.	/

5.4 Input power:
No load 0.5W Max.,at input (100~240)V AC 50/60Hz.
Loading 146W Max.,at rated output.
5.5 Efficiency:
88% Min. at rated input and output.
5.6 Temperature rising:
Case 75ºC Max. for rated output.
5.7 Insulation resistance:
500V DC 10MΩ Min.
5.8 Dielectric withsatand test :
5mA 3000V AC for 2 second between input and output input and case,at an alternative potenials 5% higher may be applied for 1 second.
5.9 Inrush current:
Peak inrush current shall be limited 120A for a cold start.
5.10 Power factor:
0.85 Min.
6,Environmental:
6.1 Operating temperature range:The operating temperature of the product shall by from -29ºC to +45.5ºC.
6.2 Storage temperature range:The storage temperature of the product shall by from -40ºC to +75ºC.
6.3 Resistance to heat:
When tested within 10 minutes after product has been placed in a test chamber maintained at 105ºC±3ºC for 16 hours,the product shall comply with the requirements of 5.8 , Dielectric withstand test,shall have resistancs not less stated below as measured at 500V DC 10 megohms minimum between the input and the output ,input and case together,10 megohms minimum.
6.4 Resistance to moisture :
The product shall by placed in a test chamber maintained at 40ºC±2ºC at 90% ~ 95% relative humidity for 6 hours then,when testing 10 minutes after product is taken out from the test chamber and wiped dry,The product shall comply with the requirements of 5.8 dielectric withstand test,and shall have insulation resistance not less than stated below as measured at 500V DC 10 megohms minimum between the primary and the secondary together,10 megohms minimum between a secondry ther secondry and together .
7,Reliability:
Thevdesign and construction of this product exhibit a minimum mean time between failure of 30000 hours full rated load operation at 25ºC.
8,Protection:
8.1 The product includes current fuse type 250V 5A located within input circuit.
8.2 Short circuit:
Capable of withstanding continuous short circuit and recover automatically.
9,Inspection:
9.1 100% inspection items:
The items of 100% inspection shall be :no-load voltage,load voltage, ripple voltage, primary current,dielectric withstand test,and general appearance.
9.2 The sampling inspection items:
The items of sampling inspection shall in addition to the 100% inspection items,include :
insulation resistance,and audible sound check.
9.3 The sampling inspection data according to 9.2 and 100% dielectric withstand test data shall be submited for each lot.
9.4 The sampling inspection items level : MIL-STD-105E II AQL : CR 0,MAJ 0.25,MIN 2.5.

FAQ:
Q: How to order?
A: Send us an inquiry → receive our quotation → negotiate details → confirm samples → sign contract/deposit → mass production → stocking → balance / delivery → further cooperation.
Q: How about sample order?
A: Samples are available for your use. Please contact us. contact us!
Q: Which shipping method is available?
A: DHL, UPS, FedEx, TNT, EMS, China Post, Sea are available. Other shipping methods are also available, if you need other shipping methods, please contact us.
Q: How long is the delivery time?
A: The delivery time depends on the quantity you ordered. Usually it takes 15-25 working days.
Q: Can the product be customized according to the actual situation?
A: Of course, we have a professional team to develop customized products.
Q: My package is missing product. what can I do?
A: Please contact our support team and we will confirm your order with the contents of the package. We apologize for any inconvenience caused.
Q: How to confirm payment?
A: We accept T/T, PayPal payment, and also accept other payment methods, please contact us before paying with other payment methods.